Counter Top Mounting Plate for Wire Shelving

The piece fits onto our wire shelving posts with split sleeves. Simply attach the anchor to a wood counter top using the included hardware.

• Two holes located 3.5 inches apart allow secure attachment to almost any table
• Can be adjusted every 1 inch along the post, allowing you to have multiple solid surfaces in a single unit

• Triangle plate extends 2.25 inches from post at right angle
• Longer side is approximately 4.75 inches long
• Can support up to 300 lbs
• Kit includes: (1) Counter Top Anchor, (1) Plastic Shelf Clip (2) 1/4 inch screws

• Attach shelf clips to desired height along post
• Lower anchor onto post, aligning straight edges with the outer edges of the unit
• Set table top on anchor, ensure that it is positioned evenly on all sides, then mark where the holes are with pencil
• Remove the top, setting it face down. Place the anchors over the holes and screw into place
• Lower the table with attached anchors onto posts, tap corners for secure connection

Note: Particle board can be used as a substrate for finer surface materials (such as marble) for a more refined effect.